Let's make sure an inside mount will work for your installation!  If you plan to install in between the posts of a patio, deck, pergola or similar structure, and mounting to the underside of a cross beam, then this is considered an inside mount. Using a metal tape measure, first check if you have sufficient depth:

• Measure the depth of the mounting surface from front to back. To install the brackets, the depth must be at least 2 1/4" for shades without a cassette valance and 3 1/4" for shades with a cassette valance. To have a flush mount (meaning the shade is fully recessed within the opening) the depth must be at least 3" without a cassette valance and 3 1/4" for shades with a cassette valance. If your depth is not sufficient for mounting the brackets, please see our outside mount instructions.

How to Measure:

Let's start with the Width:

• Measure inside of the opening/frame from left to right at the top of the opening to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

• Measure from the bottom of the cross beam/mounting surface down to wherever you would like the shade to stop in three places: on the left-hand side, the middle, and on the right-hand side. If the shade will go to the ground, we recommend leaving 6-12" of space for air flow and for room to install tie downs if selected. Write down all 3 measurements to the nearest 1/8" and circle the tallest. That is your ordering height. 

Note: Always provide us with the actual measurement of the opening. We will make the necessary deduction of approximately 1/8" to the width of the top of the shade to accommodate the installation brackets. 

The fabric portion of the shade will be approximately 7/8" – 1 3/8" narrower than the ordered width (up to 3/4" gap on each side between the window opening and the edge of the fabric).

No deductions will be made to the ordered height. 

Outside Mount

3 minutes to measure

On a Cross Beam or Above a Window (No Trim)

Installation Instructions

Inside Mount

 2 minutes to install

Let's make sure you have what you need!  

What came with your blinds?

1. Installation brackets
2. Tension device and loop control
3. Cassette valance*

What else will you need in order to complete the installation?

1. Rechargeable drill with 5/64" and ¼" bit
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

*If applicable to your order. 

Please note that brackets and componentry may be updated or substituted over time due to availability or product improvements.

Download the applicable PDF below for a complete step by step guide on how to install your inside mount blinds based on the ordered lift type. 

Outside Mount

4 minutes to install

Let's make sure you have what you need!  

What came with your blinds?

1. Installation brackets
2. Tension device and loop control
3. Cassette valance*

What else will you need in order to complete the installation?

1. Rechargeable drill with 5/64" and ¼" bit
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

*If applicable to your order. 

Product Details

Our outdoor solar shades can be installed in a number of locations to help you reduce overpowering sunlight and heat so you can enjoy your outdoor space.  Perfect for patios, overhangs and gazebos to block that morning or afternoon sun, our solar screen fabric is still see-through enough that you don't lose your view and air can still pass through. For windows with bright sun, you can install an outdoor shade outside over the window to block heat from ever entering your home so that your energy bills are lower (and you're more comfortable!). Cooler temps, less glare, and you don't lose your view? Perfect!

Get to know this shade:

• Vertilux® Solar Screen 3000 woven shade material is durable and waterproof, and is partially see-through to retain your view
• Two fabric options – 5% openness blocks about 95% of UV rays, and 10% openness blocks about 90%
• Use a clear beaded chain to raise and lower the shade (includes tensioning device to secure the chain)

Why you'll love this shade:

• Special solar screen material reduces heat gain to keep your patios and gazebos cooler
• You won't lose your view – you can still see through the shade while it blocks the sun and heat
• Position in front of windows with direct sun to help limit heat passing through the window and to cut down on cooling costs
• Cassette valance option provides a finished look and hides the fabric roll at the top of the shade
• Shade material is fragrance free, non-toxic, and flame retardant

Key considerations:

• Fabric will be up to 1 3/8" narrower than the ordered width in order to accommodate the operating mechanisms and installation bracket
• Shades wider than 96" have a maximum height of 84" (orders larger than 96" wide AND 84" long cannot be produced)
• Bungee hold downs recommended to limit shade movement in the wind

Estimated Ship Date:Aug 6th-Aug 10th