Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

• Measure inside the window opening from the back of the window to the front of the opening where the blind would mount. The depth at the top of the window must be at least 7/8" to mount the brackets. To have a flush mount (meaning the blind is fully recessed in the window opening) the depth must be at least 1 3/4". If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

• Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

• Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/2" to your blind's width to allow room for installation and for proper movement of the blind within the window opening. No deductions will be made to your height. 

Outside Mount

Above the Window (No Trim)

Width:

• Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 2" on each side of the window opening for the best light control and appearance. 
• Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Installation Instructions

Inside Mount

Let's make sure you have what you need!

What came with your blinds? 

1. Mounting brackets*
2. 1 ¼" mounting bracket screws (two per bracket)
3. One valance
4. Valance clips*
5. One tilt wand

What else will you need in order to complete the installation?

1. Rechargeable drill with ¼" hex bit
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

*Quantity will vary depending on width. Regarding mounting brackets and valance clips- if your window is up to 40" wide you will have two mounting brackets and two valance clips. If your window is 40 1/8"-54" wide you will have three mounting brackets and three valance clips. If your window is 54 1/8"-72" wide you will have four mounting brackets and four valance clips.

Download the PDF below for a complete step by step guide on how to install your inside mount blinds.

Outside Mount

Let's make sure you have what you need!

What came with your blinds? 

1. Mounting brackets*
2. 1 ¼" mounting bracket screws (two per bracket)
3. One valance
4. Valance clips*
5. One tilt wand
6. One spacer block per bracket**

What else will you need in order to complete the installation?

1. Rechargeable drill with ¼" hex bit
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

Product Details

This modern and affordable aluminum blind effortlessly reduces the amount of sunlight coming through your window as you control the resting position of the slats with a simple twist of the tilt wand. Behind the basic design of this classic window blind are high quality components inside and out that keep your blind looking and functioning great for years to come. Features a cordless lift mechanism that is safe and easy to use – just push in the button on the bottom rail, move the blind to the desired location, and release the button to hold it in place! Aluminum mini blinds have been a popular favorite for their durability, color variety and easy maintenance – everything you'll enjoy with your new 1" aluminum blind from Blindster.

Get to know this blind:

• 6-gauge aluminum slats are 1" wide in the classic mini-blind style
• Tilt wand is clear and all other components are color coordinated
• Includes an integrated valance, providing a clean, finished look

Why you'll love this blind:

• Blends into many decor styles making it easy to decorate with a wide range of appealing color selections
• Aluminum slats are spring-tempered to easily bounce back if bent an reduce dings and dents
• Dust resistant anti-static finish helps to keep slats cleaner for longer
• Innovative cordless lift system with push-button release and reliable operation
• Great for any room in the house, and its small depth requirement works great for shallow windows
• Complies with all current child safety requirements

Key considerations:

• Many colors also available in our 2" aluminum blinds

Estimated Ship Date:Jul 31st-Aug 4th