Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

• Measure inside the window opening from the back of the window to the front of the opening where the blind would mount. The depth at the top of the window must be at least 3" to mount the brackets. To have a flush mount (meaning the blind is fully recessed in the window opening) the depth must be at least 3 3/4". If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

• Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

• Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the shortest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 3/8" to your blind's width and 1/4" to your blind's height to allow room for installation and for proper movement of the blind within the window opening. 

Outside Mount

Above the Window (No Trim)

Width:

• Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 3" on each side of the window opening for the best light control and appearance. 
• Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Height: 

Installation Instructions

Inside Mount

Let's make sure you have what you need!  

What came with your blinds?

1. Track/headrail
2. Vanes
3. Mounting brackets*
4. Wand
5. 1 ¼" #8 hex head wood screws

What else will you need in order to complete the installation?

1. Rechargeable drill
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder
6. Fasteners (if mounting into aluminum or concrete)

*Quantity will vary depending on width. Regarding mounting brackets- if your window is up to 48" wide you will have two mounting brackets. If your window is 48 1/8"-78" wide you will have three mounting brackets. If your window is 78 1/8"-120" wide you will have four mounting brackets.

Download the PDF below for a complete step by step guide on how to install your inside mount blinds. 

Outside Mount

Let's make sure you have what you need!  

What came with your blinds?

1. Track/headrail
2. Vanes
3. Mounting brackets*
4. Wand
5. 1 ¼" #8 hex head wood screws

What else will you need in order to complete the installation?

1. Rechargeable drill
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder
6. Fasteners (if mounting into aluminum or concrete)

*Quantity will vary depending on width. Regarding mounting brackets- if your window is up to 48" wide you will have two mounting brackets. If your window is 48 1/8"-78" wide you will have three mounting brackets. If your window is 78 1/8"-120" wide you will have four mounting brackets.
 

Product Details

Vertical blinds have for decades been the go-to window covering for patio windows and sliding doors. Our PVC Vinyl Vertical Blinds bring this old favorite into the future with a unique new headrail design that eliminates clunky valances and unsightly tracks. The headrail features a styled front face that hides the internal mechanisms and features a clean modern look. With this design, no clunky extra valance is needed, and the blind merges seamlessly into your room. A single control wand rotates the vanes and is used to fully open or close the blind.

Get to know this blind:

• Distinctive headrail design and single wand control operation
• Vinyl vanes in a variety of styles and colors
• Available custom sizes up to 96" x 96", perfect for any window including sliding and patio doors

Why you'll love this blind:

• Modern integrated headrail design means no bulky valance is needed
• Cordless wand control is safe for kids and pets – in fact this blind is certified Best for Kids™
• Vinyl vanes are easy to clean and extra durable against scuffs and dents
• Self-aligning carrier helps keep vanes straight without breakage
• A reversible PVC headrail allows you to install the blind for either left-side or right-side stacking
• NFPA 701 certified for flame resistance

Be sure to note:

• Headrail and control wand will be either white, off-white or gray depending on blind color
• Textured colored vanes will be white on the back

Estimated Ship Date:Aug 4th-Aug 6th