Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

• Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. To mount the brackets, the depth at the top of the window must be at least 2 1/4" for shades without a cassette valance and 2 5/8" for shades with a cassette valance. To have a flush mount (meaning the shade is fully recessed in the window opening) the depth must be at least 3" without a cassette valance and 3 1/2" for shades with a cassette valance. If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

• Measure inside of the window opening/frame from left to right at the top of the opening to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

• Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/8" to the width of the top of the shade to accommodate the installation brackets. 

The fabric portion of the shade will be approximately 1" – 1 1/2" narrower than the ordered width (up to 3/4" gap on each side between the window opening and the edge of the fabric). When maximum light blocking is needed, consider an outside mount or an alternate product. 

No deductions will be made to the ordered height. 

Outside Mount

3 minutes to measure

Above the Window (No Trim)

Installation Instructions

Inside Mount

 2 minutes to install

Let's make sure you have what you need!  

What came with your blinds?

1. Mounting brackets*
2. 1 ½" #8 hex head wood screws
3. Plastic anchors (for drywall or plaster mounting)

What else will you need in order to complete the installation?

1. Rechargeable drill (use 3/32" drill bit to predrill screw holes & use ¼" drill bit for wall anchors)
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

*If applicable to your order. If you did not order a cassette valance, you will receive two mounting brackets for either side of the shade. If you did order a cassette valance you will receive concealed cassette mounting brackets that will be installed across the metal cassette, across the width of the shade. 

Please note that brackets and componentry may be updated or substituted over time due to availability or product improvements.

IMPORTANT: Do not remove the paper wrapping around the shade's fabric until the shade is installed. Removing this paper prior to installation could result in the fabric shifting on the tube or it might alter the stop location of the fabric.

Download the PDF below for a complete step by step guide on how to install your inside mount shades. 

Outside Mount

4 minutes to install

Let's make sure you have what you need!  

What came with your blinds?

1. Mounting brackets*
2. 1 ½" #8 hex head wood screws
3. Plastic anchors (for drywall or plaster mounting)

What else will you need in order to complete the installation?

1. Rechargeable drill (use 3/32" drill bit to predrill screw holes & use ¼" drill bit for wall anchors)
2. Phillips screwdriver
3. Pencil
4. Tape measure
5. Ladder

Product Details

We love the sunshine but sometimes we want to enjoy it on our own timetable. Enter our Deluxe Blackout Vinyl Roller shades to help you decide when you want to let the sunshine pour in, and when you want to block the sun and dim and room.  This budget-friendly shade is packed with value. Customize your lift option and choose from available additional features to enhance the look and performance of your shade. 

Get to know this shade:  

• 4-ply fiberglass-reinforced vinyl material blocks all light from passing through the shade
• The back (streetside) of every color is white for a neutral appearance from outside
• Four available lift options to choose from: beaded chain, cordless , cordless precision lock, or motorized lift
• Optional cassette valance is color coordinated to the shade (white, vanilla, gray or black)

Why you'll love this shade:

• Blackout fabric gives you maximum light control and privacy, perfect for bedrooms and media rooms or anywhere with bright direct sunlight
• Amazingly priced shade with great features and quality to last for years to come
• Child-safe cordless lift options available – just be sure you can reach as high as you want to lift the shade!
• Selecting a cassette valance adds a designer finish and helps block light at the top of the window for a better blackout experience
• Fabric is flame retardant, durable, and easy to clean (all great for kids' rooms!)
• Meets all CPSC child safety guidelines

Key considerations:

• The fabric portion of the shade will always be about 1 1/2" narrower than your ordered width due to the operating mechanisms and brackets at the top of the shade
• A small amount of light can still enter the room around the sides of the shade
• Shades over 73" wide AND 60" long require a seam in the fabric (see below for more info); our Deluxe Blackout Roller Shades accommodate larger sizes without a seam

Estimated Ship Date:Aug 7th-Aug 11th