Tired of being tired from too much light coming into your room? This roller shade will help you catch up on your Zzz’s by blocking 100% of incoming light. With multiple customizable options, you’ll be able to create the shade of your dreams.
Yes. Every blind is manufactured according to the exact width and height you provide.
Measure to the nearest 1/8 inch (or nearest millimeter). Accurate measurements ensure the best fit.
For Inside Mount, the factory may make small deductions where necessary to ensure the blind operates smoothly inside the window frame.&lt;br&gt;<br><br>
For Outside Mount, the blind is usually manufactured to the exact dimensions ordered.
Let's make sure an inside mount will work for your window! Using a metal tape measure, first check if you have sufficient depth:
How to Measure:
Let's start with the Width:
Now, let's do the Height:
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/8" to the width of the top of the shade to accommodate the installation brackets.
The fabric portion of the shade will be approximately 1" – 1 1/2" narrower than the ordered width (up to 3/4" gap on each side between the window opening and the edge of the fabric). When maximum light blocking is needed, consider an outside mount or an alternate product.
No deductions will be made to the ordered height.
Outside Mount
3 minutes to measure
Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/2" of flat vertical space above the window to mount the brackets for shades without a cassette valance, or at least 2" for shades with a cassette valance. Follow the directions below for where you'd like to install your shade.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Your ordered width will be the "tip to tip" measurement, which is the widest part of the top of the shade including the brackets and cassette valance (if applicable). The fabric portion of the shade will be approximately 1" – 1 1/2" narrower than the ordered width (up to 3/4" on each side. If you wish to have the fabric cover a specific width, we recommend ordering slightly wider – just ensure that you have enough horizontal space to mount the shade.
Let's make sure you have what you need!
What came with your blinds?
What else will you need in order to complete the installation?
*If applicable to your order. If you did not order a cassette valance, you will receive two mounting brackets for either side of the shade. If you did order a cassette valance you will receive concealed cassette mounting brackets that will be installed across the metal cassette, across the width of the shade.
Please note that brackets and componentry may be updated or substituted over time due to availability or product improvements.
IMPORTANT: Do not remove the paper wrapping around the shade's fabric until the shade is installed. Removing this paper prior to installation could result in the fabric shifting on the tube or it might alter the stop location of the fabric.
Download the PDF below for a complete step by step guide on how to install your inside mount shades.
Outside Mount
4 minutes to install
Let's make sure you have what you need!
What came with your blinds?
What else will you need in order to complete the installation?
Our Deluxe Blackout Roller shade is designed to block 100% of incoming light through the fabric to give you maximum light and privacy control. This wonderful shade makes your room darker and cozier when needed, but also cooler by limiting direct sunlight in the summer. With so many custom options to choose from, plus the promise of a good night’s sleep or the ability to sit back and enjoy a movie in a darkened room, what’s not to love?
Get to know this shade:
Why you'll love this shade:
Key considerations:
Estimated Ship Date:Aug 7th-Aug 11th
