Revamped with new fabrics, operating systems and features, our Premium Blackout Roller Shades are the answer for blocking light from coming into your room, whether it’s morning, noon, or night! The shade fabric is designed to block 100% of light which means sunlight, moonlight, and streetlamps will no longer prevent you from getting a good night’s sleep (or a well-deserved nap).
Yes. Every blind is manufactured according to the exact width and height you provide.
Measure to the nearest 1/8 inch (or nearest millimeter). Accurate measurements ensure the best fit.
For Inside Mount, the factory may make small deductions where necessary to ensure the blind operates smoothly inside the window frame.&lt;br&gt;<br><br>
For Outside Mount, the blind is usually manufactured to the exact dimensions ordered.
Let's make sure an inside mount will work for your window! Using a metal tape measure, first check if you have sufficient depth:
How to Measure:
Let's start with the Width:
Now, let's do the Height:
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 3/16" to the width of the top of the shade to accommodate the installation brackets.
The fabric portion of the shade will be approximately 1 1/4" – 1 7/16" narrower than the ordered width (up to 3/4" gap on each side between the window opening and the edge of the fabric). When maximum light blocking is needed, consider an outside mount or an alternate product.
No deductions will be made to the ordered height.
Outside Mount
3 minutes to measure
Before you start measuring, decide where above your window opening you want to mount your shade. You will need at least 1 1/4" of flat vertical space above the window to mount the brackets for shades without a cassette valance, or at least 4" for shades with a cassette valance. Follow the directions below for where you'd like to install your shade.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Your ordered width will be the "tip to tip" measurement, which is the widest part of the top of the shade including the brackets and cassette valance (if applicable). The fabric portion of the shade will be approximately 1 1/16" – 1 1/4" narrower than the ordered width (up to 5/8" on each side). If you wish to have the fabric cover a specific width, we recommend ordering slightly wider – just ensure that you have enough horizontal space to mount the shade.
Let's make sure you have what you need!
What came with your blinds?
What else will you need in order to complete the installation?
*If applicable to your order.
IMPORTANT: Do not remove the paper wrapping around the shade's fabric until the shade is installed. Removing this paper prior to installation could result in the fabric shifting on the tube or it might alter the stop location of the fabric.
Download the PDF below for a complete step by step guide on how to install your inside mount shades.
Outside Mount
4 minutes to install
Let's make sure you have what you need!
What came with your blinds?
The saying goes that there can be too much of a good thing. That holds true for light too, especially when too much coming through your window is disruptive. Whether it's the glare on your TV screen or bright light keeping you awake, our Premium Blackout Roller Shades are your solution for toning down that light and getting to your happy place. With these shades, pull them down a bit or all the way to get just the right amount of light or none at all. Your hand-picked options let you take control just the way you want.
Get to know this shade:
The best things about this product:
Key considerations:
Estimated Ship Date:Aug 3rd-Aug 5th
